How To Clean Sanded Wood

Step 3.

How to clean sanded wood. Sanded hardwood floor lacks a protective layer and therefore you cannot use water or liquid cleaner on it. You can make your own quite easily from a clean scrap of lint-free cloth old sheets and t-shirts can be good donors for the fabric a few drops of varnish the appropriate solvent for. The mineral spirits will clean any grime or grease off of your surface making it ready for painting or staining.

Choose the proper vacuum attachments to avoid scratches and other damage to the floor. To remove those last bits of finish palm sand with medium sandpaper 150 grit until you see the bare wood. Water spots or stains may also form on the surface.

Can teak furniture get wet. Inspect the tack cloth periodically to see how much dust you are collecting and change the tack cloth whenever it gets dirty. These solutions can be used if there are any mold mildew old peeling or yellowing finishes left.

The basic process of sanding wood is always the same. Otherwise the wood might get damaged. Start by sanding the surface with the coarsest grit you are using give everything a clean then sand everything with a finer grit and repeat the process until youve sanded the surface with the finest grit sandpaper.

Spray the teak surface liberally with Teak Cleaning Solution. Apply a coat of Teak Oil. A lightly dampened microfibre cloth may be the best way to remove dust from sanded wood.

For a clean finish hold the sanding block flat firmly applying even pressure while moving back and forth in the same direction as the grain. Make sure you dont use an oil like linseed oil. There are approved methods you can use to clean the dust before applying a polyurethane sealant or staining the surface.