How To Make A Wooden Lathe Stand

To make the joints on the workbench a little sturdier I used a lap joint which is essentially where you notch the material for the joining material to mate to.

How to make a wooden lathe stand. The parts are cut at 5 degrees to match the angle on the legs. You should adjust these measurements to suit your height or use a platform to increase your height. Follow the cut list and cut the 24 and 26 boards down to final size.

I Hope You Enjoy This Vid. Make a similar but small box as the mount for the drill. Httpsibuilditcaprojectsmaking-a-steel-stand-for-my-wood-lathe Ways you can help support this channel.

I Have Used 13mm Drill Machine. To make this go quicker I use my data stacked in my table saw. Another option would be to use a regular butt joint for all these joints.

Start by making two holes on the plywood then cut through the holes to make a longer hole. Cut all the boards to size. How to Build a Mobile Lathe Stand Step 1.

I show how I made this DIY wood lathe stand for my new 12 midi woodturning lathe. Measure the length from your elbow to the ground. The finished stand top is 29 12 above the floor which includes 12 of leveler height.

The arms on top attach directly to the bed of the lathe so its basically two single leg frames joined by a wooden cross member near the bottom at the back. These are made from 14. The stand will be painted but I want to wait until spring when the weather warms up enough to spray it outdoors.