What To Do After Sanding Wood

Wood dust from sanding will cause problems if its not removed from the surface before staining.

What to do after sanding wood. Start by blowing off the bulk of the sawdust and sanding residue t using an air compressor fitted with a blower nozzle. After stripping paint to properly clean the wooden surface use mineral spirits and fine steel wool. Apply a heavy coat of sanding sealer and allow it to soak into the wood.

Refinish your wood immediately after cleaning before the dust resettles back and interferes with the process. If you still have paint or varnish remaining on your wooden project you can repeat the stripping process and again use mineral spirits and steel wool. Because of woods natural tendency to shred and splinter when it is sanded off-grain the sander can remove more wood with the same amount of effort when positioned at an angle.

Tack the floor with a DRY lint-free rag or towel. While any vacuuming is better than none a standard filter can cause the vacuum cleaner to exhaust dust right back into the room where it can. What Are the Benefits of Sanding a Hardwood Floor.

Sanding just 10-15 off parallel is enough. Dry rags or brushes arent the most effective tools for removing dust. It helps your wood absorb the stain more evenly.

Applying a sanding sealer is another optional step when refinishing wood. For projects like furniture making wood crafts and outdoor landscaping you dont need to sand after staining. You will need to use mineral spirits after sanding.

Take a shower or at least shake yourself off well before you continue. So lets look at instances where its okay to do so. The angle does not need to be drastic.