How To Wash Wood After Sanding
While blowing the dust off with compressed air removes the dust it also mixes it into the air so some of it can settle back onto the surface and so you can breath it.
How to wash wood after sanding. Dry rags or brushes arent the most effective tools for removing dust. Using a tack cloth can also confirm that your wood surfaces have been properly sanded. Water spots or stains may also form on the surface.
Mix the cleaner according to the instructions on the bottle and allow it to soak into the wood for 15 minutes. It is not that difficult and not that expensive. Sanded hardwood floor lacks a protective layer and therefore you cannot use water or liquid cleaner on it.
After stripping paint to properly clean the wooden surface use mineral spirits and fine steel wool. This will help remove dirt and mildew from the wood surface. You can knock down the fuzz by sanding -- as long as you wait for the wood to dry.
The most effective way to clean wood after sanding is to brush all the dust off the wooden surface using a painters dust brush and then wipe the surface with a lint-free rag and mineral spirits. To remove those last bits of finish palm sand with medium sandpaper 150 grit until you see the bare wood. I will show you what you need and how to sand a deck to make it look amazing.
It is good to use a shop vac to clean the surface between sanding grits removing the larger grit particles from the wood before sanding with the next higher grit. It has been a woodworkers tool for a long time. Wood dust from sanding will cause problems if its not removed from the surface before staining.
Inspect the tack cloth periodically to see how much dust you are collecting and change the tack cloth whenever it gets dirty. By any chance if any oily substance sticks with the wood mineral spirits can help to remove it. You will need a few hours to.
