How To Preserve A Wood Carving
Clark the Carver typically adds a varnish as a layer of protection and shine to the piece.
How to preserve a wood carving. Keep your carving slightly elevated off any surface to allow moisture out through the base. Less is more and dont fix it if its not broke applies most heartily to your carving. The idea is to keep it elevated from the floor or other surface to allow continuous airflow.
Click to see full answer. Step 3 Once a year move your carving to a flat covered surface clean it with your dry brush and apply two coats of polyurethane spray. You can do this by placing flat stones or furniture pads under the carving.
A clear coat does not require re-coating often but it brings no damage if you maintain it once every 2 to 3 years. Slow and minimize this process by regularly treating the room where your carving is stored with a humidifier. A refrigerator or freezer can do the same.
First use a wet cloth to wipe down the stump and remove any dirt or debris. Apply additional polish to the brush as need. 1-inch of thickness per year for the curing time.
That makes your carving last longer. Keep your carving on an elevated surface to avoid excess moisture intake. Step 1 Spread a plastic tarp around the wood sculpture if its a tree stump or under it if it can be lifted.
Once dry buff the carving with a horsehair shoe or rotary brush apply a second coat and buff it. Generally avoid rapid changes in its environment. Gently rinse all pieces in cold water.
