How To Prep Wood Without Sanding

The technique of wetting the wood down before staining is called popping the grain.

How to prep wood without sanding. Dry rags or brushes arent the most effective tools for removing dust. Wetting the wood will raise the little fibers on its surface. You dont have to sand all the way down just enough to remove that high gloss finish If you are trying to keep a wood finish.

Because only brushing wont be enough to clean the dust laying in between wood fiber. To refinish a floor without sanding you need a floor thats already in quite a good condition. To avoid stripping or sanding the old stain off your deck thoroughly clean and rinse it and then let the wood dry for 24 to 48 hours.

If the old finish is rough to the touch or uneven then start by sanding it smooth with a medium grit sanding block. What it does is open the pores of the wood to allow it to take the stain evenly and deeply. It does excellently at removing years of grime dirt and grease.

Prep with a liquid deglosser if your furniture has intricate woodwork. Liquid sandpaper or liquid de glosser If you plan to forgo the sanding process when painting furniture a great product to use to rough up the surface is liquid de glosser or liquid sandpaper. Using a damp towel wipe down the wood.

Wood dust from sanding will cause problems if its not removed from the surface before staining. Lots of choices there. When you water pop wood you wont have to do multiple coats of stain either.

Then lightly sand with a fine grit sanding block. Thoroughly clean the floor with a pH-neutral cleaner and lightly rub it down to provide a key for the next coat. You could use a pre-paint cleaner to thoroughly clean the surface.