How To Prep Wood For Painting After Sanding
Wood dust from sanding will cause problems if its not removed from the surface before staining.
How to prep wood for painting after sanding. Primer isnt meant to cover completely its okay for the wood to show through. Try to prime in the same direction and dont worry about brush strokes. The hand brush will.
Dry rags or brushes arent the most effective tools for removing dust. If you dont wipe down the wood. Pour the mineral spirits over the stripped area and use the steel wool to wipe away any remaining stripper residue be sure to follow the wood grain.
Pound-in any protruding nail heads. While you can use any cloth to do this a tack cloth will pick up the most dust. When lightly wiped over wood surfaces it miraculously picks up dust that vacuuming and dry cloths cannot remove.
A tack cloth is really just a piece of loosely woven cheesecloth impregnated with beeswax. How to Prep Sand and Prime Furniture for Paint. Work a paint scraper from every direction keeping the blade flat against the wood so you dont create gouge marks.
After youve sanded the wood go over it with a rag to wipe it down and remove any excess material. Instead use a tack cloth a sticky piece of cheesecloth made especially for this purpose. Wipe the folded tack cloth across the wood.
While blowing the dust off with compressed air removes the dust it also mixes it into the air so some of it can settle back onto the surface and so you can breath it. Prime your piece from top to bottom always looking a little behind for drips. Cut your tack cloth into small squares and lightly wipe over all the wood surfaces.
