How To Prep Outdoor Wood Furniture For Painting

Place your furniture where it wont be under a drip line from a roof or tree limb.

How to prep outdoor wood furniture for painting. Before painting concrete floors perform a moisture test. If the piece you are painting has any rough spots like lets say youre painting new wood then you need to sand those spots smooth before painting. You can update the furniture by adding new hardware or you can use a polish to change the sheen and color to it.

Apply one coat of exterior primer to the furniture using a brush or roller. If you are painting wood furniture the first step is proper prep. If the hardware is covered in paint you can set it in an old crock pot filled with water for 24 hours and the paint should just lift off.

Likewise rust on metal pieces can be removed with a wire brush or sander and wicker or cane will need a good clean with a soft brush and sugar soap solution. Depending on the state of your furniture you may need to do some prep work first. You want to remove any old paint flakes or dust thats been left on the surface.

Clean the hardware. How do I prep indoor furniture for outdoor use. At the very least soak them all in a sink filled with hot soapy water and rinse and let dry.

Wash the entire wood surface once youre finished scraping andor sanding. Sugar Soap or mild washing up liquid bucket and sponge. Allow to dry completely.

Otherwise use a degreaser to thoroughly clean the surface. Before you can cover up that weathered wood with a coat of paint those loose fibers must be removed. Use strokes in the same direction as the wood grain.