How To Polish Soapstone Carvings

This cures the epoxy hardening it so the repaired area can be filed and sanded to reshape and remove the excess glue before polishing.

How to polish soapstone carvings. High temperatures will not hurt the stone Soapstone can take temperatures of 1700 º F without any adverse effect but the beeswax will evaporate at 300 º F. If you want a finished soapstone work to shine it must be properly treated and polished using the right kind of oil and the proper techniques. Use a lint-free cloth and rub mineral oil into the finished soapstone pipe to bring out its luster.

I will harden the epoxy before finishing by heating the carving in an oven at about 100 for about a half-hour. Remove the carving from the oven. How to polish nicks and scratches out of an Eskimo or Inuit stone carving - YouTube.

Try not to heat over 300 º F. Make sure that your carving is completely dry before you work on this step. Wax it if desired or if its going outdoors.

A material like a hard wax might be good paraffin or even colored wax pencils used for filling wood scratches. Does anyone know what is used in Zimbabwe to polish the soapstone. Place the carving in a oven and heat to 250 º F.

Michael polishes a few nicks and scratches out of a stone carving by Canadian Inuit artist Timothy Nayoumealook. We will be applying the oil by hand and will use the heat of our hands to help with the absorption process. Tung oil or furniture polishing oil.

Keep the stone clean keep dust off it with a soft cloth and fully support the sculpture. Rough out of design. Completion of the design sanding up to 220 grit.