How To Make A Wood Serving Spoon
Pick a location on the board that will allow you to get multiple spoons.
How to make a wood serving spoon. Draw out your spoon design on your stock ensuring that the grain runs straight through the entire spoon. Choosing the species of the wood is dependent on a number of factors. Instead hand wash your spoons or any wooden utensil really including silicone spatulas with wooden handles with soap and warm water.
Its made from a blend of mineral oil and beeswax so it holds up longer and does a better job of sealing wood. Washing Your Wooden Spoons. Draw a rough outline of the desire spoon on a piece of wood.
Hollow out your spoon Time to make this thing spoon shaped. Plane down one face of the wood to make the layout lines easy to see. If your spoons are rough or fuzzy refurbish them with a 320 grit sandpaper or a steel wool pad.
I used a store-bought spoon and used it to trace out the pattern I wanted. Whittle very slowly and feel with your fingers until you have roughly half a centimetre of wood left at the bottom of each hollow. It may help to draw a center line down the bowl of the spoon.
How to Create a Wooden Spoon using POWER TOOLS. The size of the initial block of wood will be dependent on how big of spoon you plan to construct. A low density hardwood such as yellow poplar or bass wood will make for easy carving.
If you really want to go the extra mile you can rub a small amount of mineral oil into the spoon with a soft cloth about once a month to help keep the wood. Newly cut wood is going to have a higher percentage of moisture content. If you dont have a bandsaw you could do this with a.
