How To Clean After Sanding Wood

Then use a vacuum or blower to get rid of dust from tricky spots.

How to clean after sanding wood. You could also choose to use a combination of some or all of. Once youre done sanding make sure youve gotten rid of ALL the sanding dust before you do anything else. After a vac I use a store bought tack cloth wipe well and triple check for dust.

Sand the dried and cured first coat of polyurethane no sooner than 24 hours after applying it. Scrub harder at any gummy or particularly dirty spots until they disappear. How do you clean up after sanding.

Inspect the tack cloth periodically to see how much dust you are collecting and change the tack cloth whenever it gets dirty. Soak a soft rag into the virgin mineral spirit and wipe the floor to clean the dust. Yet a more thorough way of cleaning the fine dust particles from a sanded wood floor left behind after vacuuming or dust mopping.

While blowing the dust off with compressed air removes the dust it also mixes it into the air so some of it can settle back onto the surface and so you can breath it. The next step is the trick here. Always Remove Dust After Sanding.

White vinegar for heavily soiled unfinished wood that has sticky residue or similar film buildup. Cut your tack cloth into small squares and lightly wipe over all the wood surfaces. Using a tack cloth can also confirm that your wood surfaces have been properly sanded.

Use a good vacuum and then a tack rag to wipe the surface clean of any contaminants. You may also want to mop it with warm water and a little bit of a water-based cleaner. You will need a hand brush to clean the dust.