How To Build A Lap Desk

Building the lap desk is very simple.

How to build a lap desk. I ended up ripping a little bit off one board because I wanted my top to be just 13 wide instead of the 14-12 width thats written in the plans. In this video I build a desk with hidden laptop storage and a hidden power strip compartment using reclaimed pallet wood. It is just 3 boards joined together by pocket holes.

Fold the fabric up around the foam and secure to. I used a router to round off the edges of the top. After cutting the lumber we recommend you to lock them together with galvanized screws.

I had a few scraps of wood laying around from previous projects so I decided to tackle a quick easy and almost free build. Then line up the notch on the bottom of the memory with the notch in. This little desk can also provide a comfortable and relaxed way to learn for the upcoming school year so far so good.

Then go to one of the short sides and pull the fabric tight. Place the fabric on a table and center the foam then plywood bottom on top of it. Everything else wood screws nails glue stain I had on-hand.

With the laptop off connect your display cable from your laptop to your monitor of choice be it via HDMI DisplayPort DVI or VGA. You may notice the two boards arent the same width. Four pieces of solid wood.

Two pieces of plywood that are the size of your laptop plus two inches in length and 2 inches 51 cm in width. Fold under to create a finished edge and add a staple in the center. The first step of the project is to build the sides of the lap desk.