Do You Wash Wood After Sanding
Using a soft-bristle attachment thoroughly vacuum the floor baseboards and windowsills.
Do you wash wood after sanding. Its important that you make sure there is no chance of rain when you begin to sand. If you seek a perfect finish make sure the tack cloth glides smoothly over the wood as you wipe. If not return to the sanding stage to get it right.
Make sure your deck is thoroughly dry before you sand. The mineral spirits will clean any grime or grease off of your surface making it ready for painting or staining. The most effective way to clean wood after sanding is to brush all the dust off the wooden surface using a painters dust brush and then wipe the surface with a lint-free rag and mineral spirits.
Use the low power setting to avoid damaging the wood. While blowing the dust off with compressed air removes the dust it also mixes it into the air so some of it can settle back onto the surface and so you can breath it. Water spots or stains may also form on the surface.
You can also choose to use a denatured alcohol if the remover that you are using is neither of these two. There are approved methods you can use to clean the dust before applying a polyurethane sealant or staining the surface. You would need to remove the sanding dust.
Otherwise they would not stick to the wood properly. Sanded hardwood floor lacks a protective layer and therefore you cannot use water or liquid cleaner on it. Do this work immediately after sanding before the deck wood can weather or get dirty.
To answer your direct question no you dont need to clean the deck if all the wood is sanded down to raw wood. When exposed it will absorb water or the cleaner and warp. Before staining or painting sanding is very important.
